(1) When using propeller models marked with "CW", the propeller and motor rotate in a clockwise direction (when viewed from above); when using propeller models marked with "CCW", the propeller and motor rotate in a counterclockwise direction (when viewed from above); "U" indicates the upper propeller blade, and "L" indicates the lower propeller blade.
(2) The propeller is made of strong and tough material. If it touches unprotected human body parts during high-speed rotation, it can cause severe injury. Please use it with utmost caution.
(3) The structural strength of the propeller has been fully tested. Please use it reasonably within the recommended maximum tensile force range. Exceeding the limit tensile force will damage the blades. Please do not test the strength of the blades by bending them with your hands, as this method differs significantly from the actual stress during flight and may also cause damage to the blades.
(4) Please carefully check whether the cover screws are installed in place before use, and ensure that the propeller is properly installed.
(5) Before takeoff, it is necessary to check whether the mounting screws are tightened, and whether the propeller is damaged. If there are cracks on the propeller blades, there is a potential risk of fracture, so please replace it in time.
(6) When storing propellers, they should be kept away from corrosive gases and harmful environments, as well as temperature ranges not exceeding 0~40C and humidity ranges above 80%. Special attention should be paid, especially during long-term storage.
(7) When installing the propeller on the motor, be sure to apply anaerobic screw glue with a medium or higher strength to the mounting screws.
(8) Please use this product in accordance with local laws and regulations.












