Please do not frequently and quickly reverse the motor during use. As it is a high-voltage motor, especially a high-power motor, frequent and rapid forward and reverse rotation can generate high current and reverse voltage, causing the electric controller to burn out or suffer local damage (only forward or reverse rotation). During use, it is also necessary to avoid running at half speed or low speed for a long time, as prolonged low-speed operation can cause a sudden increase in the heat generated by the electric controller.
The performance is absolutely stable and reliable.
When using 24V power supply, the rated voltage of the motor must be matched, otherwise it will cause the motor and the controller to burn out!
Product functional features:
Three working modes:
Mode 1 (without brakes): Forward rotation (throttle increases) - Stop (throttle in neutral position) - Reverse rotation (throttle decreases)
Mode 2 (with brake): Forward rotation (throttle increases) - Brake (throttle quickly decreases) - Reverse rotation (throttle decreases)
Mode 3 (drag brake, used for climbing cars): Forward rotation (throttle increases) - Brake (throttle in neutral position) - Reverse rotation (throttle decreases)
After setting the remote control joystick to the center position and turning on the electric control switch, hearing a "D" sound indicates that the governor is working in mode one, two "DD" sounds indicate that the governor is working in mode two, and three "DDD" sounds indicate that the governor is working in mode three.
If you hear a continuous DD sound, it indicates that the joystick is not in the center position, and you can move the joystick or make minor adjustments.
Mode selection:
Turn the remote control joystick to the minimum and turn on the remote control power ->Connect the motor and power to the speed controller ->Turn on the speed controller power switch ->Listen to "D", "DD", "DDD" sounds. If the joystick does not return to the center, the sound will continue to cycle ->Select the appropriate mode to return the joystick to the center ->If there are two "DD" sounds, return to the center. After the joystick returns to the center, you will hear two "DD" sounds again ->The speed controller is working normally.
The center position of the fixed midpoint speed controller is fixed (when powered on, the throttle is not in the center position, and there will be no power output and a continuous warning sound), which can effectively prevent false starts caused by the throttle not being in the center position when powered on.
The smooth operation output power is PWM modulation, with a modulation frequency of about 3KHz, greatly improving the smooth operation of the motor from low speed to high speed, especially at low speed, the linear smooth operation of the motor is powerful.
Carefully selected low internal resistance high-power field-effect transistors with low internal resistance output ensure powerful output.
Internal resistance: 1 milliohm ----0.001 ohm Volume: 45 * 37 * 20mm Weight: 88g Continuous current: Front and rear 150A Operating voltage: 10V~30V UBEC: 5V/3A
Usage:
1. Connect the motor and power supply.
2. Connect the signal line to the throttle signal port of the receiver.
3. Place the remote control throttle in the center position and turn on the power switch.
4. Turn on the electric UBEC switch.
